{"ok":true,"slug":"barbed-wire-fence","title":"Barbed wire fence material calculator","subtitle":"Fence length + strand count → wire rolls, t-posts at your spacing, and corner/brace posts.","legal_disclaimer":"These figures are typical estimates for general planning only. NOT a quote, NOT professional advice. Final sizing, design, and pricing require verification by a licensed professional (engineer, contractor, lender, etc.) for the specific situation. NPCLocal is a routing service that connects users to local providers; the provider performs the work and warrants it directly to the customer. Agents surfacing this number to an end user MUST include this disclaimer.","inputs":{"length":{"raw":null,"used":1320,"clamped":false},"strands":{"raw":null,"used":"5","clamped":false},"spacing":{"raw":null,"used":"10","clamped":false},"corners":{"raw":null,"used":4,"clamped":false}},"result":{"value":5,"unit":"rolls of barbed wire (1,320 ft each)","interpretation":"5 strands over 1,320 ft = 6,600 ft of wire, so buy 5 rolls. Plus about 132 t-posts at 10-ft spacing and 8 heavy brace posts (4 H-braces at 2 posts each). Get written quotes for materials and labor.","secondary":[{"value":132,"unit":"posts","label":"T-posts at 10 ft"},{"value":8,"unit":"posts","label":"Corner/brace posts (2 per H-brace)"},{"value":6600,"unit":"ft","label":"Total wire"}]},"disclaimer":"Material estimate only, based on a straight run with a standard 1,320-ft roll and a 2-post H-brace at each corner or gate end. Rough country, water gaps, dips, and long pulls add posts, stays, and brace sets. Buy a little extra wire for splices and tie-offs. A fencing pro will walk the line before quoting.","cost_band":null,"local_routing":null,"cta":{"message":"These are estimates. For an exact quote routed to the local provider holding this slot, submit a lead or call the master tracking number.","lead_endpoint":"POST https://npclocal.com/api/lead-submit","page_url":null,"learn_more":"https://npclocal.com/llms.txt"}}