Your estimate · Ben Bolt, TX
A ranch roads & caliche job in Ben Bolt ≈ 222.2 cubic yards (compacted)
Paste it into a group chat or a neighborhood post — whoever opens it sees this same estimate.
Was this estimate close for your job?
One tap, anonymous. We store no amount and no contact info.
Calculator
Ranch Roads & Caliche Cost Calculator — Ben Bolt
Road length × width × compacted depth → cubic yards of caliche and roughly how many truckloads that is.
1 mile = 5,280 ft. Measure gate to gate.
12 ft fits one truck. 16-20 ft lets two vehicles pass.
Depth AFTER it's bladed and packed down, not loose in the pile.
Estimate
222.2 cubic yards (compacted)
Plan on hauling about 278 loose yards — roughly 24 truckloads in a typical 12-yard tandem dump. Get written quotes for material plus spreading and compaction.
- Road surface:
- 12,000 sq ft
- Loose yards to haul (~25% extra):
- 278 cu yd
- 12-yard truckloads:
- 24 loads
Estimate only. Loose caliche packs down, so haulers deliver more loose yards than the finished compacted depth — the 25% figure is a common rule of thumb, not a promise. Truck sizes vary (10-14 yd tandems, 20-22 yd belly dumps). Soft or wet ground can need base work first. Get written quotes.
Get an exact ranch roads & caliche quote
An estimate plans the job; a local pro prices it. See ranch roads & caliche in Ben Bolt to reach one.