Sprinkler & Irrigation in Corpus Christi, TX
Subtropical Gulf Coast climate.
For sprinkler & irrigation, the service area covers roughly 45 miles from central Corpus Christi.
Common reasons to call
- Sprinkler zone will not turn on
- Broken head, geyser, or flooded flower bed
- Controller programming problem
- Low pressure or dry spots in the lawn
- Backflow preventer repair or inspection issue
- New irrigation system for sod or landscape install
- Smart controller upgrade for water savings
- Expansive clay soil movement causing broken lines in Calallen or Southside
Typical work
- Irrigation system diagnosis and zone-by-zone test
- Sprinkler head, nozzle, valve, and solenoid replacement
- Mainline, lateral line, and drip-line repair
- Controller programming and smart controller install
- Backflow prevention device repair coordination
- New irrigation layout, design, and installation
- Seasonal adjustment for watering restrictions and plant needs
Typical turnaround
Small repairs are commonly scheduled within a few business days. New systems, large repairs, and backflow-related work depend on licensed irrigator availability, parts, permits, and inspection needs.
Materials and equipment
- PVC pipe, fittings, primer, and solvent cement
- Spray heads, rotors, nozzles, drip tubing, and emitters
- Irrigation valves, solenoids, manifolds, and valve boxes
- Controller, rain sensor, flow sensor, and smart irrigation controls
- Backflow prevention assembly where required
- Wire, waterproof connectors, and locator tools
- Pressure regulators and filters for drip zones
Job sizes
Minor
Broken head, nozzle change, controller programming, or small drip repair
Standard
Valve replacement, wiring repair, zone repair, or smart controller install
Major
Mainline repair, multi-zone rebuild, backflow repair coordination, or new beds added
Replacement
Full irrigation system install, major redesign, or complete controller and valve rebuild
Final pricing comes from the on-call provider after on-site assessment, with a written estimate before any work starts.
What to expect
- ✓TCEQ Licensed Irrigator or supervised Irrigation Technician required for most irrigation work
- ✓Zone-by-zone testing before repair recommendations
- ✓Backflow protection reviewed where water-supply connection is involved
- ✓Controller schedule adjusted for season, restrictions, and plant needs
TCEQ Licensed Irrigator (LI), TCEQ Irrigation Technician (IT) under licensed irrigator supervision, TCEQ Irrigation Inspector (II), Backflow Prevention Assembly Tester where applicable, Irrigation Association credentials.
Common questions
Does sprinkler work require a license in Texas?
Yes for most irrigation work. TCEQ licenses irrigators and technicians. Ask for the license number before design, install, repair, or service work starts.
Why is one zone flooding my yard?
A broken head, cracked lateral line, stuck valve, or bad solenoid can flood a zone. The tech runs the system zone by zone and checks pressure, heads, valves, and controller timing.
Can you install a smart controller?
Yes. Smart controllers help adjust watering based on schedule, rain, and season. They still need correct zones, nozzles, and pressure to work well.
What is a backflow preventer?
It protects the drinking-water supply from irrigation water flowing backward. If fertilizer or chemicals are injected into the system, stronger backflow protection may be required.
Why do sprinkler lines keep breaking?
Expansive clay soil, shallow pipe, tree roots, pressure spikes, and vehicle traffic can all crack lines. Calallen, Southside, and newer subdivisions see soil movement that can stress irrigation pipe.
Can you add drip irrigation to flower beds?
Yes. Drip is good for beds, foundations, and shrubs when designed correctly. It needs filters, pressure control, and good zoning so it does not overwater.
Do watering restrictions matter?
Yes. The controller should match current local rules and plant needs. A licensed irrigator can adjust run times and zones so the lawn gets water without wasting it.
Coastal Bend seasons
Spring (March - May)
Best time to repair zones before sod, landscaping, and peak heat. Broken heads show up after winter dormancy ends.
Summer (June - August)
Heavy use exposes leaks, dry spots, pressure issues, and controller mistakes. Water restrictions and heat stress make tuning important.
Fall (September - November)
Good time to adjust watering down and repair damage from summer movement in clay soils.
Winter (December - February)
Lower demand makes it easier to handle redesigns, valve rebuilds, and controller upgrades.