Dock & Boat Lift Builders in Alice, TX
Inland South Texas climate, warmer in summer than Corpus Christi (less Gulf moderation).
For dock & boat lift builders, the service area covers roughly 75 miles from central Alice.
Common reasons to call
- Canal home needs a new dock or the old one is rotting out
- Want a boat lift so the hull stays out of the saltwater
- Existing lift straining, stuck, or dropping on one side
- Storm damage to dock, pier, or boathouse
- New waterfront purchase needs dock, lift, and bulkhead looked at together
- Want a fishing pier with lights and a cleaning station
- Lift needs re-sizing for a bigger boat
Typical work
- New docks and piers on treated pilings or composite decking
- Boat lift installs sized to the boat: cradle, elevator, and PWC lifts
- Boathouse builds and re-roofs
- Lift repairs: motors, cables, bunks, and leveling
- Dock repairs, re-decking, and piling replacement
- Fishing piers with lighting, benches, and cleaning stations
- Electrical work on docks done to code with proper shore-power safety
Typical turnaround
Permits set the pace on new structures, start early. Lift repairs usually run days to a couple of weeks. After a hurricane or bad blow, every dock builder on the coast backs up for months, one more reason to fix known weak points before summer.
Materials and equipment
- Marine-treated pilings and framing
- Composite or treated decking
- Aluminum and galvanized lift hardware, motors, and cables
- Marine-rated electrical: GFCI protection, proper conduit, and lighting
Job sizes
Minor
Lift service call, re-decking a section, or replacing bunks and cables
Standard
New boat lift installed on an existing dock
Major
New dock and lift package on a canal lot
Replacement
Full rebuild after storm damage or a complete dock, boathouse, and lift project
Final pricing comes from the on-call provider after on-site assessment, with a written estimate before any work starts.
What to expect
- ✓Permits handled with GLO, Corps, and local offices as required
- ✓Licensed electricians on dock power and lighting
- ✓Lifts sized to full wet weight, not brochure weight
- ✓Marine-grade materials specified in writing
Marine construction experience, barge and pile-driving equipment, licensed electricians for shore power and lighting, liability insurance, familiarity with GLO, Corps, and local permitting.
Common questions
Why do I need a boat lift at all?
Saltwater works on a hull every hour it floats: growth, corrosion, and waterlogged bottom paint. A lift keeps the boat dry, clean, and ready, saves bottom jobs, and protects resale value. On our canals it is the difference between a boat that lasts and a boat that ages fast.
Do I need a permit for a dock or lift?
Usually some permission is involved: local city or county rules, and depending on the water bottom, the GLO or the Corps of Engineers. Replacing like-for-like is generally simpler than building new or bigger. Good builders know the local process cold and handle the paperwork, ask how permits are handled in the quote.
How do I size a boat lift?
By the boat's full wet weight: hull, motors, fuel, water, and gear, which runs well past the brochure dry weight. Undersized lifts strain, wear early, and fail at the worst time. Size for the boat you are likely to own next, not just the one you have, the price step up is small compared to replacing a lift.
What is killing my dock, and can it be repaired?
Sun, salt, and storms, and the waterline is where pilings and hardware suffer most. Loose deck boards are often cosmetic; soft pilings, rusted through hardware, or racking when you walk are structural. A builder can tell you honestly whether re-decking buys years or the bones are done. Catching it early is much cheaper.
Should the boat be strapped down for a hurricane?
Have a plan before the season: many owners haul out entirely for a named storm, and a boat left on a lift needs the lift raised, drain plug out, and the boat secured per the lift maker's guidance. Docks with known weak framing should be repaired before storm season, storm surge finds every shortcut a builder ever took.
Can you add lights and power to my dock safely?
Yes, and safely is the operative word: dock electrical should be installed by a licensed electrician with GFCI protection and marine-rated materials, because faulty dock wiring can be lethal in the water. Underwater green fishing lights, cleaning stations, and lift power are standard additions when wired right.
Coastal Bend seasons
Spring (March - May)
Get docks and lifts ready before summer: cables, motors, and bunks checked while builders still have calendar room.
Summer (June - August)
Peak use season and hurricane watch. Small repairs now beat big rebuilds later.
Fall (September - November)
Post-storm inspections and repair season. Winter northers push low tides that expose piling condition.
Winter (December - February)
Low winter tides give the best look at pilings and lift structure all year, and builders book big projects for spring.